background image

 

               1 

 

 

 

 

FOR YOUR PERSONAL 
SAFETY 

 

 

This new appliance is easy to use. 
However, it is important to read the 
whole of this booklet  before installing 
or using the appliance for the first 
time. This will enable you to obtain 
the best results from the appliance, to 
avoid incorrect use and to use the 
appliance  safety and with respect for 
the environment

 

 

DURING USE 

 

• 

The appliance should be used by adults only. 

Make sure that children do not touch the 
controls or play with the appliance

• 

It is dangerous to modify or to attempt to modify 
the characteristics of this product. 

• 

Keep the appliance clean at all times

• 

The external parts of the appliance heat up when 
the appliance is in use and remain hot for a 
certain length of time after it has been turned off. 

Keep children away from the appliance until 
it has cooled down

• 

Always make sure that the appliance is 

disconnected

 from mains before carrying out 

maintenance work and before cleaning the 
appliance. 

• 

Never attempt to repair faults yourself

Repairs carried out by unqualified persons may 
result in damage to the equipment or personal 
injury. Consult this booklet and if you do not 
find the information you are looking for 

contact 

your nearest Service Centre

. This appliance 

should be serviced by authorised Technical 
Service Centres only. Always ask for original 
spare parts to be used. 

 
 
 

INSTALLATION AND 

MAINTENANCE 

 

• 

The appliance should be installed and 
connected to mains 

by QUALIFIED 

PERSONNEL only

. Before carrying out any 

work on the appliance always make sure that it 
has been 

DISCONNECTED 

from the mains. 

• 

Remove the appliance from the packaging, 
check it for damage and make sure that the 
power supply cable is in perfect condition. If 
any damage is apparent contact your retailer 
before using the appliance. 

• 

The Manufacturer declines all responsibility 
if the instructions in this book are not 
adhered to. 

 
 

RECOMMENDATIONS FOR 

SAFEGUARDING THE 

ENVIRONMENT 

 

PACKAGING 

• 

All packaging material is environmentally 
friendly and can be recycled. Please help 
safeguard the environment by disposing of 
packaging correctly using the waste disposal 
sites in your area. 

 

AT THE END OF THE APPLIANCE’S LIFE 

• 

When the appliance is to be scrapped, cut off 
the power supply cable. 

• 

Check with your local Council or 
Environmental Health Office to see if there are 
facilities in your area for re-cycling the 
appliance. 

 
 
This instruction booklet should be kept with the 
appliance for future reference. If the appliance 
is sold or transferred, make sure that the 
booklet is handed over to the new owners so 
that they are aware of the operating instructions 
and relative warnings. 

ENGLISH 

Summary of Contents for ZCOF636X

























Reviews: