background image

 

               5 

 

 

 

 

light goes out the water has reached the required 
temperature for coffee making. 

• 

Close the steam knob by turnig clockwise (ref.1) 
and release the hot water button (ref.5). 

• 

Allow any dispensed water to fall into the drip 
tray or a cup and discard. 

 
 

ACCESSORIES SUPPLIED 

 

• 

The coffee machine is supplied with a filter 
holder (ref.20) for one-cup filters (ref.21) and 
two-cup filters (ref.22).  
If you are using pods, use the one-cup filter

• 

A scoop (ref.23) is also supplied for measuring 
ground coffee (approx. 7.2g). 

 
 

OPTIONAL ACCESSORIES 

 

• 

A practical drawer with stainless steel front 
panel is available as an optional accessory, 
model 

ZDRA 600 X. 

The drawer is divided into several compartments 
for various uses : 

-  compartment for cups and saucers 
-  basin for coffee dregs 
-  compartment for machine accessories (filter, 

measure). 

- tray 

The over all dimensions of the drawer are given 
on page 18. 

 
 

MAKING COFFEE 

 

MAKING COFFEE WITH COFFEE 

BEANS 

 

• 

Only use fresh good quality beans

• 

Place the filter holder (ref.20) beneath the 
dispenser (ref.19) and  press the grinder button 
for at least one second and release (ref.18) this 
will automatically supply the correct one-cup 

measure of ground coffee. For 2-cup filters 
(ref.22) repeat the operation.  

• 

Press the ground coffee with the coffee press 
(ref.17) . 

• 

Place the filter holder (ref.20) on the ring nut 
(15) making sure it locks into place: move the 
handle of the filter holder from left to right. 

• 

Place one or two coffee cups below the spout 
of the filter holder with the correct nozzle 
fitted. 

• 

When the red water temperature indicator light 
(ref.9) goes out, press the coffee button (ref.4). 

• 

Once the required quantity of coffee has been 
dispensed press the coffee button (ref.4) a 
second time to stop the supply. 

• 

Remove cup(s) from the machine. 

• 

Remove the filter holder from the ring nut and 
empty the used ground coffee from it. 

 

 

MAKING COFFEE WITH PODS 

(E.S.E. system) 

 

• 

E.S.E stands for Easy  Serving Espresso and is 
the International standard for making coffee 
using pods (a pod is a disposable single-use 
portion of roasted coffee) and a suitable coffee 
machine. The E.S.E. system is simple, practical 
and ecological since no special maintenance is 
required and nature is respected. Lastly, the 
system is clean as the special wrapping 
prevents spillage and is easily removed and 
disposed of after use.

 

• 

The machine is designed for use with ground 
coffee or pods: single-use disposable portions 
of roasted coffee.

 

• 

Place the pod in the filter holder.

 

• 

Position the filter holder (ref.20) on the ring nut 
(ref.15) making sure it locks into place: move 
the handle of the filter holder from left to right.

 

• 

Place a coffee cup below the spout of the filter 
holder.

 

• 

When the red water temperature indicator light 
(ref.9) goes out, press the coffee button (ref.4).

 

Summary of Contents for ZCOF636X

























Reviews: