Zanussi ZCS6604, User Manual

64

Cleaning the oven door da

For a more complete cleaning of the oven door, it is
advisable to disassemble it in the following way:
1. open the door fully;
2. turn the two caps situated on the arm of the hinge to
180° (diagram 1 and 2);
3.  partially close the  door to an angle of 30° (diagram
3);
4. lift the door and extract from the front (diagram 3).

Re-mount the door by reversing the operation described
above.

Models in stainless steel or aluminium:

We recommend to clean the oven door using only a wet
sponge and dry it up after cleaning with a soft cloth.
Never use steel wool, acids or abrasive products as they
can damage the oven surface.
Clean the oven control panel following the same
precautions.

Replacing the Oven Light

If the oven bulb needs replacing, it must comply with the
following specifications:

- Power: 15 / 25 W,
- Voltage: 230 V (50 Hz),
- Temperature Rating of 300 °C,
- Thread type: E14.
These bulbs are available from your local Service Force
Centre.

To replace the faulty bulb:

1. Ensure the oven is disconnected from the electrical

supply.

2. Turn the glass cover  anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.

1

2

3

!