Zanussi ZCV66078WA, User Manual

•

If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service Centre or

similarly qualified persons to avoid an electrical hazard.

•

To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls. Install

the shelf supports in the opposite sequence.

•

The means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

•

WARNING: Use only hob guards designed by the manufacturer

of the cooking appliance or indicated by the manufacturer of

the appliance in the instructions for use as suitable or hob

guards incorporated in the appliance. The use of inappropriate

guards can cause accidents.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must have

suitable dimensions.

• Keep the minimum distance from other

appliances and units.

• Make sure that the appliance is installed below

and adjacent safe structures.

• Parts of the appliance carry current. Close the

appliance with furniture to prevent touching the

dangerous parts.

• The sides of the appliance must stay adjacent to

appliances or units with the same height.

• Do not install the appliance adjacent to a door

or under a window. This prevents hot cookware

to fall from the appliance when the door or the

window is opened.

• Make sure to install a stabilizing means in order

to prevent tipping of the appliance. Refer to

Installation chapter.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric

shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Do not let mains cables touch or come near the

appliance door, especially when the door is hot.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an isolation

device which lets you disconnect the appliance

4