Zanussi ZCV662, User Manual

Hob - Daily use

Warning! Refer to "Safety information" chapter.

Heat settings

Control knob

Function

0

Off position

1-6

Heat settings

(1 = lowest heat setting; 6= high-

est heat setting)

1. Turn the control knob to a necessary heat setting.
2. To complete the cooking process, turn the control

knob to the “0” position.

Residual heat indicator

The residual heat indicator comes on when a cooking

zone is hot.

Warning! Risk of burns from residual heat!

Hob - Helpful hints and tips

Warning! Refer to "Safety information" chapter.

Cookware

• The bottom of the cookware must be as thick and

flat as possible.

• Cookware made of enamelled steel and with alu-

minium or copper bottoms can cause discolora-

tion on glass ceramic surface.

Energy saving

• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start

it.

• Stop the cooking zones before the end of the

cooking time to use residual heat.

• The bottom of pans and cooking zones must

have the same dimension.

Examples of cooking applications

Heat set-

ting:

Use to:

1

Keeping warm

2

Gentle simmering

3

Simmering

4

Frying / browning

5

Bringing to the boil

6

Bringing to the boil / quick frying / deep-

frying

Hob - Care and cleaning

Warning! Refer to "Safety information" chapter.

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the glass ceramic have

no effect on how the appliance operates.

To remove the dirt:
1. – Remove immediately:melted plastic, plastic foil,

and food with sugar. If not, the dirt can cause

damage to the appliance. Use a special scraper

for the glass . Put the scraper on the glass surface

at an acute angle and move the blade on the sur-

face .

– Remove after the appliance is sufficiently

cool:limescale rings , water rings, fat stains, shi-

ny metallic discolorations. Use a special cleaning

agent for glass ceramic or stainless steel.

2. Clean the appliance with a moist cloth and some de-

tergent.

3. At the end rub the appliance dry with a clean cloth.

7