What to do if…
Warning!
Refer to "Safety information"
chapter.
Problem
Possible cause
Remedy
The hob does not operate
The heat setting is not set
Set the heat setting
The oven does not heat up
The oven is not switched on
Switch on the oven
The oven does not heat up
The clock is not set
Set the clock
The oven does not heat up
The necessary settings are not set
Control the settings
The oven does not heat up
The fuse in the fuse box is re-
leased
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
The oven lamp does not operate
The oven lamp is defective
Replace the oven lamp
Steam and condensation settle on
the food and in the oven cavity
You left the dish in the oven for
too long
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The display shows “12.00”
A power cut
Reset the clock
The residual heat indicator does
not come on
The cooking zone is not hot be-
cause it operated only for a short
time.
If the cooking zone must be hot,
speak to the Service Centre.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning!
Refer to "Safety information"
chapter.
Technical Data
Dimensions
Height
900 mm
Width
596 mm
Depth
600 mm
Dimensions
Top oven capacity
37 l
Main oven capacity
74 l
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
17
www.zanussi.com
Summary of Contents for ZCV665
Page 1: ...EN User manual Cooker ZCV665 ...
Page 23: ...23 www zanussi com ...
