4
4
CONTROL PADS ON THE DEHUMIDIFIER
1 Plug in
2 Press Power button to turn on the unit and the machine starts to work
,
.
.
.
.
Turn on
Turn off
Press Power button during operation machine stops operation and all lights are off
,
.
Note Do NOT unplug directly during operation Turn off the power supply before unplug to avoid
to avoid damage to electrical parts to reduce the life of the dehumidifier
.
,
.
:
Dehumidifying mode
Press the mode button to select the desired mode as below order
Normal dehumidifying
Continuous dehumidifying
Strong dehumidifying
Normal dehumidifying
The appliance works under low fan speed and default target humidity value is 55
Indicator Lights
Control panel operation
Continuous dehumidifying
Strong dehumidifying
Normal dehumidifying
Timer
Swing
High wind
Low wind
Child lock
Dry clothes
Full of water
Defrost
Sleep
Air circulation
.
,
%
.
Press the
and button repeatedly to set the desired humdity level to 30 to 80
%
%
Press the fan speed button to set the fan speed
.
Continuous dehumidifying
The appliance constantatly works with dehumidifying function The fan will operate at low speed and can
not be adjuested
.
The humidity can not be set
.
Strong dehumidifying
The default target humidity level is 30 The appliance constantaly works with dehumidifiying function
until ambient humidity reaches 30 The fan will operate at high speed and can not be adjusted
%
%
.
.
.
Dry Clothes
The appliance constantly works with the dehumidifying function and the fan will operate at high speed The
humidity and fan speed can not be adjusted
.
Defrost function
The appliance has defrost function When the defrost light is flashing the dehumidifier stops working
.
.
,
.
The fan works normally
Water full alarm
When the water tank is full the water full indicator turn red and flashing The buzzer will beep 20 times
,
.
.
.
The compressor will stop and the fan will stop automatically after several minutes The appliance will
.
resume working after emptying the water and put back the water tank
.
Air purification function
Press the air circulation button the compressor stops working fan speed can be adjusted by pressing
,
,
the fan speed Using the carbon filter can increase the odor removal function
.
.
.
.
,
.
