9
9
Water can be automatically emptied into a
floor drain by attaching the unit with a water
hose( included).
Cut the cover down from the back drain
hose outlet. Attach a drain hose(ID=10mm)
and lead it to the floor drain or a suitable
drainage facility
Make sure the hose is secure so there are no
leaks.
Direct the hose toward the drain,making sure
that there are no kinks that will stop the warter
flowing.
Place the end of the hose into the drain and
make sure the end of the hose is level or
down to let the water flow smoothly.Do never
let it up.
Make sure the water hose is lower than the
drain hose outlet.
Select the desired humidity setting and fan
speed on the unit for continuous draining to
start.
OPERATING THE UNIT
2. Continuous draining
Removing the collected water
NOTE: When the continuous drain feature is
not being used, remove the drain hose from
the outlet.
.
Fig.7
