Zanussi ZDC47100G, User Manual

1. Open the small door at

the lower part of the cabi-

net

2. Turn the yellow stop up-

wards

3. Pull out the reservoir

4. Open the small cover

and let water flow down

5. Close the small cover

and re-insert correctly the

reservoir

6. Push it until it clicks and

turn the yellow stop down-

wards firmly lock it.

7. Close the small door

and press the START/

PAUSE button again to al-

low the programme to

continue.

Cleaning the drum

Caution!  Do not use abrasives or steel wool to clean

the drum.
Lime in the water or cleaning agents may form a

barely visible lining on the inside of the drum. The

degree to which the laundry has been dried is then no

longer detected reliably. The laundry is damper than ex-

pected when removed from the appliance.
Use a standard domestic cleaner (e.g. vinegar-based

cleaner) to wipe down the inside of the drum and drum

ribs.

Clean control panel and housing

Caution!  Do not use furniture cleaners or

aggressive cleaning agents to clean the machine.

Use a damp cloth to wipe down the control panel and

housing.

What to do if ...

Troubleshooting by yourself

Certain problems are due to lack of simple maintenance

or oversights, which can be solved easily without calling

out an engineer. Before contacting your local Service

Centre, please carry out the checks listed below.

During machine operation it is possible that the red Start/

Pause pilot light flashes to indicate that the machine is

not working.

Once the problem has been eliminated, press the Start/

Pause button to restart the programme. If after all checks,

the problem persists, contact your local Service Centre.

Problem

Possible cause

Remedy

Dryer does not work.

Mains plug is not plugged in or fuse is

not working correctly.

Plug in at mains socket. Check fuse in

fuse box (domestic installation).

Loading door is open.

Close loading door.

Have you pressed the START/PAUSE

button?

Press the START/PAUSE button again.

Drying results unsatisfactory.

Wrong programme selected.

Select a different programme the next

time you dry (see “Programme over-

view” chapter).

10