Machine settings
Setting
Implementation
BUZZER permanent off
1.
Turn the programme selector to any programme.
2.
Press simultaneously the
DELICATE
and
ANTI-CREASE
buttons
and hold down for approx. 5 seconds.
3.
The buzzer is by default always off.
Water hardness
Water contains, a variable quan-
tity of limestone and mineral
salts of which quantities vary ac-
cording to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sensi-
tivity of the drying sensor based
on conductivity values of the
water.
1.
Turn the programme selector to any programme.
2.
Press simultaneously the
ANTI-CREASE
and
START/PAUSE
but-
tons and hold down for approx. 5 seconds. Lights show the current
setting:
– END - low conductivity <300 micro S/cm
– DRYING - medium conductivity 300-600 micro S/cm
– DRYING and END - high conductivity >600 micro S/cm
3.
Press the
START/PAUSE
button sequentially until you set desired
level.
4.
To memorize setting press simultaneously the the
ANTI-CREASE
and
START/PAUSE
buttons or turn knob to
OFF
position
Technical data
Dimensions (mm)
Width / Height / Depth
850 x 600 x 580 mm
Max. depth
(with the appliance door open)
1090 mm
Max. width
(with the appliance door open)
950 mm
Electrical connection
Voltage
230-240 V
Frequency
50 Hz
Fuse
13 A
Total power
2600 W
Drum volume
108 l
Weight of the appliance
30,5 kg
Laundry: max. weight
7 kg
Type of use
Household
Ambient temperature
Min.
5 °C
Max.
35 °C
Energy consumption
1)
kWh/cycle
4,25 kWh
Annual energy consumption
2)
512 kWh
11
www.zanussi.com
