Daily use
Switching machine on
Turn the programme selector to any programme.
The machine switches on.
Door opening and
laundry loading
1.
Open the door.
2.
Load your laun-
dry (do not force
it in).
Caution!
Do not
jam laundry in
between the loading
door and rubber seal.
3.
Close loading
door securely.
Lock must audi-
bly lock.
Selecting the pro-
gramme
Turn the programme
selector dial to the re-
quired programme.
The light START/
PAUSE starts to
flash.
4
1 2 3
10
11
9 8 7
5
6
Selecting additional functions
You can choose from the additional functions:
button 1 - DELICATE
button 2 - ANTI-CREASE
button 3 - BUZZER
button 5 - DELAY
DELICATE
gentle drying with reduced heat of sensitive fabrics
and temperature-sensitive textiles (e.g. acrylic, vis-
cose) marked on care label with:
ANTI-CREASE
prolongs the anti-crease phase to 90 mins in total.
The laundry remains relaxed and free of creases.
BUZZER
audible confirmation of:
• cycle end
• anti-crease phase start and end
• cycle interruption
• error
DELAY START
allows to delay the start of a drying programme:
3
or
6
or
9
hours
1.
select the drying programme and additional
drying options
2.
press the Delay button repeatedly until the de-
sired delay start is chosen
3.
to activate the delay timer, press the Start/
Pause button
Starting the programme
Press the START/PAUSE button. The pro-
gramme is started.
The programme phase is shown by appropriate
lights; light 10 - DRYING , light 11 - END .
Changing programme
To change a programme which has been selec-
ted by mistake once the programme has started,
first turn the programme selector to
OFF po-
sition. The programme is cancelled.
The programme can no longer be changed
directly once the programme has started. If
nevertheless there is an attempt to change the
programme on the programme knob or if an
function button (excluding the
BUZZER
but-
ton
1)
) is pressed, led on the START/PAUSE
button starts flashing temporarily in red. The
drying programme is not however affected by
this (laundry protection).
8
www.zanussi.com
