11
Maintenance and Cleaning
Before any maintenance or cleaning work is
carried out DISCONNECT the appliance
from the ELECTRICITY supply.
Internal Cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax
polishes or cleaning products containing
bleach or alcohol.
External Cleaning
Wash the outer cabinet with warm soapy water.
Do not use abrasive products.
There may be sharp edges on the underside
of the product so care should be taken
when cleaning.
Ensure the vents at the back of the appliance are
clear of dust and debris etc.
Changing the refrigerator
light bulb
1. Switch off the appliance and disconnect from the
electricity supply.
2. Press the back latch, and remove the cover.
3. Pull bulb downwards and remove.
4. Replace the bulb with a 11W S/E flourescent bulb
(available from your local Service Force Centre).
5. After replacing the bulb, assemble the front latch of
the cover and then connect the back latch.
6. Plug in the appliance.
Bio Deodorizer
From time to time it may be necessary to clean the
Bio Deodorizer.
1. Unclip and remove the white cover.
2. Carefully prise out the deodorizing block.
3. Rinse carefully in a bowl of clean water.
4. Allow to dry naturally.
5. When completely dry replace.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.
Summary of Contents for ZDK 22 RF
Page 1: ...1 FROST FREE FRIDGE FREEZER ZDK 22 RF...
Page 19: ...19...