Zanussi ZDK 22 RF, Owner'S Manual

17

Electrical Connection

Any electrical work required to install this

apliance must be carried out by a qualified

electrican or competent person.

This appliance must be earthed.

The manufacturer declines any liability should

these safety measures not be observed.

Electrical Requirements

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance

rating plate.

The appliance is supplied with a 13 amp plug fitted. In

the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362) fuse

must be used.

Should the plug need to be replaced for any reason.

The wires in the mains lead are coloured in accord-

ance with the following code:

Green and Yellow

: Earth

Blue

: Neutral

Brown

: Live

The wire coloured green and yellow must be con-

nected to the terminal marked with the letter “E” or by

the earth symbol       or coloured green and yellow.

The wire coloured blue must be connected to the

terminal marked “N” or coloured black.

The wire coloured brown must be connected to the

terminal marked “L” or coloured red.

Upon completion there must be no cut, or stray

strands of wire present and the cord clamp must be

secure over the outer sheath.

Important:

If the mains supply cable is damaged, it must be

replaced by a cable available from your local Service

Force Centre.`