Control knob
Symbol
Function
0
Off position
1 - 6
Heat settings
Residual heat
WARNING!
There is a risk of burns from residual
heat.
Daily use
WARNING!
Refer to Safety chapters.
Before first use
Put cookware containing water on each cooking
zone, set the maximum position and operate the
hob for 10 min. This is to burn off the residue in
the appliance. After that, operate the hob at
minimum position for 20 min. During this period,
an odour and smoke can occur. This is normal.
Make sure that the airflow is sufficient.
Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates. The red dots are painted on
the plates. They can deteriorate during use and
even disappear completely after a period of
time. It does not have an effect on the
performance of the hob.
The heat setting
To set or change the heat setting turn the knob
to the correct heat setting. To deactivate turn
the knob to off position.
Power indicator activates when one or more
cooking zones are activated. When you
deactivate the cooking zones the indicator
deactivates.
Hints and tips
WARNING!
Refer to Safety chapters.
Cookware
The bottom of the cookware must be
as thick and flat as possible.
CAUTION!
Do not use cast iron pans,
potstones, earthenware, grill or
toaster plates. The stainless steel
can become tarnished if it is too
much heated.
Examples of cooking applications
Heat
set-
ting:
Application:
1
Keeping warm
Heat
set-
ting:
Application:
2
Gentle simmering
3
Simmering
4
Frying / browning
5
Bringing to the boil
6
Bringing to the boil / quick frying /
deep-frying
6
www.zanussi.com
Summary of Contents for ZEE6140FXK
Page 1: ...EN ZEE6140FXK User Manual Hob ...
Page 11: ...www zanussi com 11 ...
