Kitchen unit with oven
The hob recess dimensions must obey the indi-
cation and the kitchen unit must be equipped
with vents to let a continuous supply of air. The
electrical connection of the hob and the oven
must be installed separately for safety reasons
and to let easy remove oven from the unit.
50 cm
2
360 cm
2
180 cm
2
120 cm
2
Product description
Cooking surface layout
180
mm
180
mm
145
mm
145
mm
5
4
2
1
6
3
1
Cooking zone 2000 W
2
Cooking zone 2000 W
3
Cooking zone 1500 W
4
Control knobs
5
Power indicator
6
Cooking zone 1500 W
Electric cooking zones control knobs
Symbol
Function
0
off position
Symbol
Function
1
minimum heat
6
maximum heat
Operation
To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cook-
ing zone, set the maximum position and operate
the appliance for 10 min. This is to burn off the
residue in the appliance. After that, operate the
appliance at minimum position for 20 min. Dur-
ing this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is suf-
ficient.
After this operation, clean the appliance with a
soft cloth soaked in warm water.
Rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates.
18
www.zanussi.com
Summary of Contents for ZEE6940
Page 45: ...45 www zanussi com ...
Page 46: ...46 www zanussi com ...
Page 47: ...47 www zanussi com ...
