Display
Description
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on the cooking zone.
The Automatic Switch Off function operates.
Residual heat indicator
Warning!
The risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from
the heat of the cookware.
Daily use
Warning!
Refer to the Safety chapters.
Activation and deactivation
Touch
for 1 second to activate or deacti-
vate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you ac-
tivate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). An acoustic signal
sounds some time and the appliance deacti-
vates. Remove the object or clean the con-
trol panel.
• The appliance becomes too hot (e.g. when,
a saucepan boils dry). Before you use the
appliance again, wait for the cooking zone
to cool down.
• You use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates.
See below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
,
-
— 6 hours
•
-
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
The heat setting
Touch the control bar at the heat setting. Move
your finger along the control bar to change the
setting. Do not release before you have a cor-
rect heat setting. The display shows the heat
setting.
Bridge function
The Bridge function connects two cooking
zones and they operate as one.
First set the heat setting for one of the cooking
zone.
To activate the Bridge function touch
. To
set or change the heat setting touch one of
the control sensors.
To deactivate the Bridge function touch
.
The cooking zones operate independently.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic Heat
Up function. This function sets the highest
heat setting for some time (see the diagram),
7
www.zanussi.com
Summary of Contents for ZEM6740FBA
Page 1: ...EN User manual Hob ZEM6740FBA ...
Page 19: ...19 www zanussi com ...
