Zanussi ZEV6140FBA, User Manual

•

Unattended cooking on a hob with fat or oil can be dangerous

and may result in fire.

•

Never try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire blanket.

•

Do not store items on the cooking surfaces.

•

Metallic objects such as knives, forks, spoons and lids should

not be placed on the hob surface since they can get hot.

•

Do not use a steam cleaner to clean the appliance.

•

If the glass ceramic surface / glass surface is cracked, switch

off the appliance to avoid the possibility of electric shock.

•

If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

Safety instructions

Installation

WARNING!

Only a qualified person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Keep the minimum distance from the other

appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always wear

safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance adjacent to a

door or under a window. This prevents hot

cookware to fall from the appliance when the

door or the window is opened.

• If the appliance is installed above drawers

make sure that the space, between the

bottom of the appliance and the upper

drawer, is sufficient for air circulation.

• The bottom of the appliance can get hot.

Make sure to install a non-combustile

separation panel under the appliance to

prevent access to the bottom.

Electrical Connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can make

the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance

or hot cookware, when you connect the

appliance to the near sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

www.zanussi.com

3