Door reversal directions
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store food
in a cool place.
3. dismantle the lower hinge (3), pin (1) and the
screw (2);
4. Slide out the door from pin (D), unscrew the pin
and reposition on the opposite side.
5. unscrew the left front foot and reposition on the
opposite side;
6. unscrew the two screws which mask the holes for
fixing the hinge from the left front side;
7. reassemble the door;
8. reassemble the lower hinge (turning it 180¡), the
pin and the screw on the opposite side, as shown
in the figure;
9. dismantle the handle (6) and reassemble it on the
opposite side.
Important
After completion of the door reversiing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier on a low setting.
D
D590
180
°
1
3
2
D299
2
D336
15
