Zanussi ZFC 62/23 FF, Instruction Booklet

5

INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD 
APPLIANCE THAT HAS A LOCK OR CATCH 
ON THE DOOR, YOU MUST ENSURE THAT IT 
IS MADE UNUSABLE TO PREVENT YOUNG 
CHILDREN BEING TRAPPED INSIDE.

Depending upon the position which you choose for 
your appliance, you may wish to reverse the way in 
which the door opens. To do this, refer to 
instructions on “Door reversal directions” 
paragraph.

Positioning

For this appliance to work efficiently, it should be 
located away from heat sources, e.g. cookers, 
radiators, boilers, direct sunlight etc. This also 
includes locations or rooms where the ambient 
temperature reaches above 32 degrees C or drops 
below 10 degrees (e.g. conservatories).

You should also ensure that air can circulate freely 
around the back and the top of the cabinet. There 
must also be at least 100 mm (4”) distance between 
the top of the cabinet and any overhanging kitchen 
furniture (Fig. 1-A). Ideally, the appliance should 
not be positioned beneath overhanging furniture 
(Fig. 1-B).

Fig. 1

There should also be a gap of 25 mm either side of 
the appliance. Do not obstruct the space 
underneath. The back of the cabinet may be placed 
close to the wall but must not touch it. DO NOT 
install in places with restricted ventilation.

A

B

D204

100 mm

min.

Adjust the level of the appliance by screwing out 
the adjustable foot, or feet, at the bottom of the 
cabinet using your fingers or a spanner (see Fig. 2).

Fig. 2

Rear spacers

In the bag with the documentation, there are two spacers 
which must be fitted in the two top corners.

Slacken the screws and insert the spacer under the 
screw head, then re-tighten the screws.

Fig. 3

Before using

Remove all securing tapes. Wash inside the 
appliance with lukewarm water and bicarbonate of 
soda (5 ml to 0.5 litre of water). Do not use soap or 
detergent as the smell may linger. Dry thoroughly.

D200

D594