Zanussi ZFC11400WA, User Manual

Problem

Possible cause

Solution

The products' temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at the

same time.

Store less products at the same

time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened often. Open the door only if necessary.

Products to be frozen are placed

too closely to each other.

Make sure that there is cold air

circulation in the appliance.

Customer Service

If your appliance is still not working properly

after making the above checks, contact the

nearest service centre.
To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found

either on the guarantee certificate or on the

rating plate located on the external right side of

the appliance.

Installation

WARNING!

Refer to Safety chapters.

Positioning

CAUTION!

If you are discarding an old

appliance that has a lock or catch on

the lid, you must ensure that it is

made unusable to prevent young

children being trapped inside.

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

Climate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specified temperature range. If you

have any doubts regarding where to

install the appliance, please turn to

the vendor, to our customer service

or to the nearest Service Centre

The appliance shall have the plug

accessible after installation.

Electrical connection

• Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

• The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power

supply socket is not earthed, connect the

appliance to a separate earth in compliance

with current regulations, consulting a

qualified electrician.

www.zanussi.com

9