33
Changing the opening
direction of the door
Unplug the appliance before performing the following
operations:
Remove the ventilation grille (D-Fig. 4).
Unscrew the bottom hinge (E-Fig. 4).
Remove the screws of the bracket with foot (I) and
levelling foot (H) and reassemble them on the
opposite side (Fig. 3).
Remove the door from the upper pivot (A-Fig. 5).
Remove the pivot and the washer (A+B-Fig. 5) from
the upper hinge (C), then mount these on the opposite
side.
Re-assemble the door.
Screw down the bottom hinge (E-Fig. 4) on the
opposite side, using the screws previously removed.
Detach the plug (F-Fig. 4) from the ventilation grille
(D). To do this, press it in the direction of the arrow.
Insert the plug (G), which is supplied with the
appliance, into the hole left free on the opposite side.
Re-assemble the ventilation grille.
Reverse the direction of the handle (Fig. 6).
Warning
After having reversed the opening direction of the
door, check that the door gasket is adherent to the
cabinet.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for natural fitting of the gasket or accelerate
this process by heating up the part involved with a
normal hairdrier.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
D691
I
H
E
F
D
D640
F
F
F
C
B
A
D427
D162
