Zanussi ZFCT16X, User Manual

Keep the hood

clean

Clean the appliance and grease filters each month. Clean the interior and grease

filters carefully from fat. Fat accumulation or other residue may cause fire.

Grease filters can be washed in a dishwasher.

The dishwasher must be set to a low temperature and a short cycle. The grease

filter may discolour, it has no influence on the performance of the appliance.

Charcoal filter

The time of saturation of the charcoal filter varies depending on the type of cook-

ing and the regularity of cleaning the grease filter. The activated charcoal filter is

not washable, cannot be regenerated and must be replaced approximately every

4/6 months of operation, or more frequently for particularly heavy usage.

CLEANING THE GREASE FILTER
Filters are mounted with the use of clips and pins

on the opposite side.
To clean the filter:

1. Press the handle of the mounting clip on the

filter panel underneath the hood (1).

1

2

2. Slightly tilt the front of the filter downwards (2),

then pull.

Repeat the first two steps for all filters.

3. Clean the filters using a sponge with non

abrasive detergents or in a dishwasher.

The dishwasher must be set to a low

temperature and a short cycle. The

grease filter may discolour, it has no

influence on the performance of the

appliance.

4. To mount the filters back follow the first two

steps in reverse order.

Repeat the steps for all filters if applicable.

REPLACING THE CHARCOAL FILTER

WARNING! The charcoal filter is

NON-washable! The filter cannot be

regenerated!

To replace the charcoal filter:

1. Remove the grease filters from the appliance.

Refer to "Cleaning the grease filter" in this chapter.

2. Turn the filter counterclockwise (1) and then

pull (2).

1

2

To mount the filters back follow the steps in reverse

order.
In any case, it is necessary to replace the filters at

least every four months.

REPLACING THE LAMP

WARNING! Risk of burns and electric

shock! Disconnect the appliance from

the electricity before the operation!

Make sure that the light bulb has

cooled down before touching it.

WARNING! Risk of injury! Use

protective gloves to replace the lamp.

Risk of damage to the appliance! Do

not use sharp edged tools!

Replace the burnt light bulb in accordance with the

specifications:

Power (W)

4

Socket

E14

9