INSTALLATION
GB
Warning
IF YOU ARE DISCARDING AN OLD
APPLIANCE THAT HAS A LOCK OR CATCH
ON THE DOOR, YOU MUST ENSURE THAT IT
IS MADE UNUSABLE TO PREVENT YOUNG
CHILDREN BEING TRAPPED INSIDE.
Depending upon the position which you choose
for your appliance, you may wish to reverse the
way in which the door opens. To do this, refer to
instructions on “Door reversal directions”
paragraph.
Positioning
This appliance is designed to operate in
ambient temperatures between 10°C (50°F) and
32°C (90°F). It should be located in a dry
atmosphere, out of direct sunlight and away
from extreme temperature e.g. not next to a
cooker or other sources of direct heat, or in a
very cold room e.g. an outhouse, where the
temperatures may fall below 10°C (50°F). If
these temperatures are exceeded i.e. colder or
warmer, then the appliance may not operate
correctly.
You should also ensure that air can circulate
freely around the back and the top of the
cabine”. There must also be at least 100 mm
(4”) distance between the top of the cabinet and
any overhanging kitchen furniture (Fig. 1-A).
Ideally, the appliance should not be positioned
beneath overhanging furniture (Fig. 1-B).
There should also be a gap of 25 mm either
side of the appliance. Do not obstruct the space
underneath. The back of the cabinet may be
placed close to the wall but must not touch it.
DO NOT install in places with restricted
ventilation.
Adjust the level of the appliance by screwing
out the adjustable foot, or feet, at the bottom of
the cabinet using your fingers or a spanner (see
Fig. 2).
Rear spacers
The plastic bag containing all relevant
documentation also contains two spacers to be
fitted into special holes in the back of the
appliance. Fit the spacers into the holes, taking
care to ensure that the arrow (A) is positioned
as shown in Fig. 3. Then turn them through 45°
(arrow (A) vertical) until they lock into place.
5
Fig. 2
Fig. 3
D200
PR60
A
45
°
A
B
NP005
100 mm
10 mm
10 mm
Fig. 1
