34
Door reversibility
Before carrying out the operations described below,
pull out the mains plug from the wall socket.
To carry out door reversal operate as follows:
Remove the plastic cover (6) (which has a clip-in
fitting) masking the bottom hinge;
Remove bottom hinge (1);
Slide out the lower door from middle hinge (2) and
remove the latter;
Slide out the upper door from pin (3), unscrew the
latter and then screw it down into the hinge
provided on the opposite side;
Refit the upper door and the middle hinge on the
opposite side;
Refit the lower door and bottom hinge (1) on the
opposite side, after having removed the plugs (7)
and screws; these must then be refitted in the holes
on the opposite side;
Refit the plastic cover (6) on the bottom hinge.
Remove handles (4) - (5) and refit them on the
opposite side.
The holes that are not used are to be masked with
the plastic plugs removed.
D074
3
2
1
6
7
4
5
