A
B
C
D
E
Important!
The wires in the mains lead are
coloured in accordance with the following code:
A
Green and Yellow:
Earth
C
Brown:
Live
D
Blue:
Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the col-
oured markings identifying the terminals in your
plug, proceed as follows:
1.
Connect the wire coloured green and yel-
low to the terminal marked either with the
letter “E“ or by the earth symbol
or col-
oured green and yellow.
2.
Connect the wire coloured blue to the ter-
minal either marked with the letter “N“ or
coloured black.
3.
Connect the wire coloured brown to the
terminal either marked with the “L“ or col-
oured red.
4.
Check that no cut, or stray strands of wire
is present and the cord clamp
E
is secure
over the outer sheath.
5.
Make sure the electricity supply voltage is
the same as that indicated on the appliance
rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug
fitted
B
. In the event of having to change the
fuse in the plug supplied, a 13 amp ASTA ap-
proved (BS 1362) fuse must be used.
Warning!
A cut off plug inserted into a 13
amp socket is a serious safety (shock)
hazard. Ensure that it is disposed of safely.
Technical data
Dimension
Height
850 mm
Width
550 mm
Depth
612 mm
Rising Time
22 h
Voltage
230-240 V
Frequency
50 Hz
The technical information are situated in the rat-
ing plate on the internal left side of the appli-
ance and in the energy label.
11
www.zanussi.com
Summary of Contents for ZFT11100WA
Page 1: ...EN User manual Freezer ZFT11100WA ZFT11100XA ...
Page 13: ...13 www zanussi com ...
Page 14: ...14 www zanussi com ...
Page 15: ...15 www zanussi com ...
