WARNING!
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside from
spoiling in case of a power failure.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
Possible cause
Solution
The appliance does not operate.
The appliance is switched off.
Switch on the appliance.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the mains
socket.
Connect a different electrical ap-
pliance to the mains socket. Con-
tact a qualified electrician.
The appliance is noisy.
The appliance is not supported
properly.
Check if the appliance stands
stable.
Power indicator light is flashing.
An error has occurred in measur-
ing the temperature.
Contact a qualified electrician or
contact the nearest Authorized
Service Centre.
The appliance is not working
properly.
Contact a qualified electrician or
contact the nearest Authorized
Service Centre.
The compressor operates contin-
ually.
Temperature is set incorrectly.
Refer to "Operation" chapter.
Many food products to be frozen
were put in at the same time.
Wait some hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the ap-
pliance were too warm.
Allow food products to cool to
room temperature before storing.
The door is not closed correctly.
Refer to "Closing the door".
There is too much frost and ice.
The door is not closed correctly
or the gasket is deformed/dirty.
Refer to "Closing the door".
The water drainage plug is not
correctly positioned.
Position the water drainage plug
in the correct way.
www.zanussi.com
9
Summary of Contents for ZFT11112WE
Page 1: ...EN ZFT11112WE User Manual Freezer ...
Page 14: ...14 www zanussi com ...
Page 15: ...www zanussi com 15 ...
