Zanussi ZFU23403WA, User Manual

• Do not touch the compressor or the condenser.

They are hot.

• Do not remove or touch items from the freezer

compartment if your hands are wet or damp.

• Do not freeze again food that has been thawed.

• Obey the storage instructions on the packaging

of frozen food.

CARE AND CLEANING

WARNING! Risk of injury or damage

to the appliance.

• Before maintenance, deactivate the appliance

and disconnect the mains plug from the mains

socket.

• This appliance contains hydrocarbons in the

cooling unit. Only a qualified person must do the

maintenance and the recharging of the unit.

• Regularly examine the drain of the appliance and

if necessary, clean it. If the drain is blocked,

defrosted water collects in the bottom of the

appliance.

DISPOSAL

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children and pets

to be closed inside of the appliance.

• The refrigerant circuit and the insulation

materials of this appliance are ozone-friendly.

• The insulation foam contains flammable gas.

Contact your municipal authority for information

on how to discard the appliance correctly.

• Do not cause damage to the part of the cooling

unit that is near the heat exchanger.

CONTROL PANEL

2

3

1

1

Temperature regulator

2

Alarm light

3

Power indicator light

SWITCHING ON
1. Insert the plug into the wall socket.

2. Turn the temperature regulator clockwise to a

medium setting.

Power indicator and alarm lights will illuminate.

SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to   position. 

The power indicator light remains

switched on until the appliance is

disconnected from the power socket.

TEMPERATURE REGULATION
The temperature is automatically regulated.
To operate the appliance, proceed as follows:

1. turn the temperature regulator towards lower

settings to obtain the minimum coldness

2. turn the temperature regulator towards higher

settings to obtain the maximum coldness

A medium setting is generally the most

suitable. However, the exact setting

should be chosen keeping in mind that

the temperature inside the appliance

depends on:

• room temperature

• frequency of opening the door

• quantity of food stored

• appliance location.

4