Zanussi ZFU23403WA, User Manual

Problem

Possible cause

Solution

Many food products were put

in at the same time.

Wait some hours and then check

the temperature again.

The room temperature is too

high.

Refer to climate class chart on

the rating plate.

Food products placed in the

appliance were too warm.

Allow food products to cool to

room temperature before storing.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The food products' tempera-

ture is too high.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

INSTALLATION

WARNING! Refer to Safety chapters.

POSITIONING
This appliance can be installed in a dry, well

ventilated indoor where the ambient temperature

corresponds to the climate class indicated on the

rating plate of the appliance:

Climate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

ELECTRICAL CONNECTION
• Before plugging in, ensure that the voltage and

frequency shown on the rating plate correspond

to your domestic power supply.

• The appliance must be earthed. The power

supply cable plug is provided with a contact for

this purpose. If the domestic power supply

socket is not earthed, connect the appliance to

a separate earth in compliance with current

regulations, consulting a qualified electrician.

• The manufacturer declines all responsibility if

the above safety precautions are not observed.

• This appliance complies with the E.E.C.

Directives.

INSTALLATION OF THE APPLIANCE AND

DOOR REVERSAL

Please refer to separate instructions

on installation (ventilation

requirements, levelling) and door

reversal.

7