Zanussi ZFU25113WA, User Manual

•

Do not damage the refrigerant circuit.

•

Do not use electrical appliances inside the food storage

compartments of the appliance, unless they are of the type

recommended by the manufacturer.

•

Do not use water spray and steam to clean the appliance.

•

Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

•

Do not store explosive substances such as aerosol cans with a

flammable propellant in this appliance.

•

If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

• Remove all the packaging and the transit bolts.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Make sure the air can circulate around the

appliance.

• At first installation or after reversing the door

wait at least 4 hours before connecting the

appliance to the power supply. This is to allow

the oil to flow back in the compressor.

• Before carrying out any operations on the

appliance (e.g. reversing the door), remove the

plug from the power socket.

• Do not install the appliance close to radiators or

cookers, ovens or hobs.

• Do not install the appliance where there is direct

sunlight.

• Do not install this appliance in areas that are too

humid or too cold.

• When you move the appliance, lift it by the front

edge to avoid scratching the floor.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric

shock.

• The appliance must be earthed.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the electrical

components (e.g. mains plug, mains cable,

compressor). Contact the Authorised Service

Centre or an electrician to change the electrical

components.

• The mains cable must stay below the level of the

mains plug.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

USE

WARNING! Risk of injury, burns,

electric shock or fire.

• Do not change the specification of this

appliance.

3