12
50
50
FO 2039
FO 0199
a
Carry out the building in of the hob as follows:
•
put the seals supplied with the hob, on the
edges of the cut out: place them exactly on
the front and rear edge and at 50 mm. from
the side edges, as shown in the diagram, taking
care that the seals meet without overlapping;
•
place the hob in the cut out, taking care that it
is centred;
•
fix the hob with the relevant fixing clamps
and screws, as shown in the diagram. When
the screws have been tightened, the excess
seal can be removed.
The edge of the hob forms a double seal which
prevents the ingress of liquids.
Seal
☞
Fitting the hob to the worktop
