background image

2

Important Safety Information

Guide to Use the instructions

The following symbols will be found in the text to guide
you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental Information

About Installation, Cleaning
and Manteinance

• It is mandatory that all operations required for the

installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.

• Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance
work.

• Ensure a good ventilation around the appliance. A

poor air supply could cause lack of oxygen.

• Ensure that the gas supply complies with the gas type

stated on the identification label, placed near the gas
supply pipe.

Using a gas cooking appliance will produce heat
and moisture in the room which it has been
installed in. Ensure a continuous air supply,
keeping the air vents in good conditions or
installing a cooker hood with discharge tube.

In case of intensive or long time use of the
appliance, make the ventilation more efficient, by
opening a window or increasing the electric
exhaust fan power.

• Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable
is in perfect conditions. Otherwise, contact your
dealer before proceeding with the installation.

• The manufacturer disclaims any responsability

should all the safety measures not be carried out.

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.

During Operation

• It is most important that this instruction book should

be retained with the appliance for future reference.
Should the appliance be sold or transferred, always
ensure that the book is left with the appliance in order
that the new owner can get to know the functions of
the appliance and the relevant warnings.

• This appliance  has been designed for non

professional purpose in private houses only. It is
meant to cook edible foodstuff only and 

MUST

 

NOT

 be

used for any other purposes.

• It is 

dangerous 

to alter the specification in any way.

These warnings are provided in the interest of safety. You 

MUST

 read them carefully before installing

or using the appliance.

• For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local  Service Centre.
Always insist on genuine  spare parts.

• Ensure that all control knobs are in the OFF position

when not in use.

• Should you connect any electrical tool to a plug near

this cooking appliance, ensure that electric cables
are not in contact with it and keep them far enough
from the heated parts of this appliance.

If the appliance is out of order, disconnect it from the
electric supply.

Child Safety

• This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST

 

NOT

 be allowed to tamper with the controls or

play near or with the oven.

• Accessible parts of this appliance may become hot

when it is in use. Children should be 

KEPT

 

AWAY

 until

it has cooled.

 Environmental Information

• After installation, please dispose of the packaging with

due regard to safety and the environment.

• When disposing of an old appliance, make it unusable,

by cutting off the cable.

These instructions are only for the countries
stated by the symbol printed on the front cover
of this instruction book.

Summary of Contents for ZGF 78 ICX












Reviews: