Zanussi ZGH66425XS, User Manual

dirt can cause damage to the hob. Take care to

avoid burns.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and a non-abrasive detergent. After

cleaning, wipe the hob dry with a soft cloth.

• To clean the enamelled parts, caps and crowns,

wash them with warm soapy water and dry them

carefully before you put them back on.

CLEANING THE SPARK PLUG
This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

PERIODIC MAINTENANCE
Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem

Possible cause

Remedy

There is no spark when you try

to activate the spark generator.

The hob is not connected to an

electrical supply or it is con-

nected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep

the knob pushed for equal or

less than 10 seconds.

The flame ring is uneven.

Burner crown is blocked with

food residues.

Make sure that the injector is

not blocked and the burner

crown is clean.

IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Centre. Give the data from the rating plate. Make

sure, you operated the hob correctly. If not the

servicing by a service technician or dealer will not

be free of charge, also during the warranty period.

The instructions about the Service Centre and

conditions of guarantee are in the guarantee

booklet.

13