Zanussi ZGH75524XA, User Manual

SAFETY INSTRUCTIONS

This appliance is suitable for the following markets:

PT ES

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

WARNING! Risk of injury or damage

to the appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Keep the minimum distance from other

appliances and units.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Seal the cut surfaces with a sealant to prevent

moisture to cause swelling.

• Protect the bottom of the appliance from steam

and moisture.

• Do not install the appliance adjacent to a door

or under a window. This prevents hot cookware

falling from the appliance when the door or the

window is opened.

• If the appliance is installed above drawers make

sure that the space, between the bottom of the

appliance and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get hot. Make

sure to install a non-combustible separation

panel under the appliance to prevent access to

the bottom.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric

shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Make sure the appliance is installed correctly.

Loose and incorrect electricity mains cable or

plug (if applicable) can make the terminal

become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance or

hot cookware, when you connect the appliance

to the near sockets.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug (if applicable) or to the mains cable.

Contact our Authorised Service Centre or an

electrician to change a damaged mains cable.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an isolation

device which lets you disconnect the appliance

from the mains at all poles. The isolation device

must have a contact opening width of minimum

3 mm.

GAS CONNECTION

CAUTION! When using a gas cylinder,

always keep it on a flat horizontal

surface (with the gas valve on top).

• All gas connections should be made by a

qualified person.

• Before installation, make sure that the local

distribution conditions (nature of the gas and

gas pressure) and the adjustment of the

appliance are compatible.

• Make sure that there is air circulation around the

appliance.

• The information about the gas supply is on the

rating plate.

• This appliance is not connected to a device,

which evacuates the products of combustion.

4