Zanussi ZGH75524XB, User Manual

CARE AND CLEANING

WARNING! Refer to Safety chapters.

GENERAL INFORMATION
• Clean the hob after each use.

• Always use cookware with a clean base.

• Scratches or dark stains on the surface have no

effect on how the hob operates.

• Use a special cleaner suitable for the surface of

the hob.

Stainless steel
• Wash stainless steel parts with water, and then

dry them with a soft cloth.

• To remove burnt food, fat and stubborn stains

let them soak in a small amount of mild

detergent for a few minutes before cleaning.

• Use cleaning products designed specifically for

cleaning stainless steel in order to protect the

steel surfaces.

• Do not use cleaning products containing

corrosive chemicals such as chlorides, do not

clean the surface with disinfectants, stain or rust

removers and immersion cleaners.

PAN SUPPORTS

The pan supports are not resistant to

washing in a dishwasher. They must

be washed by hand.

1. Remove the pan supports to easily clean the

hob. 

Be very careful when you replace

the pan supports to prevent the

hob top from damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash the

pan supports by hand and dry them. If

necessary, remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make sure

that the arms of the pan supports are aligned

with the centre of the burner.

CLEANING THE HOB
• Remove immediately: melted plastic, plastic

foil, sugar and food with sugar, otherwise, the

dirt can cause damage to the hob. Take care to

avoid burns.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and a non-abrasive detergent. After

cleaning, wipe the hob dry with a soft cloth.

• To clean the enamelled parts, caps and crowns,

wash them with warm soapy water and dry them

carefully before you put them back on.

CLEANING THE SPARK PLUG
This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

PERIODIC MAINTENANCE
Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

13