Zanussi ZGO65414, User Manual

colorations. Use a special cleaner appli-
cable for surface of hob.

2.

Clean the appliance with a damp cloth and
some detergent.

3.

At the end 

rub the appliance dry with a

clean cloth.

In order to properly place the pan supports,
make sure that the arms of the pan support are
positioned in correspondence with the hole
placed at the base of the burner. This way, the
pan support will be stable and fixed.

Warning!

 Do not use knives, scrapers or

similar instruments to clean the surface of

the glass or between the rims of the burners
and the frame (if applicable).

Warning!

 Do not slide cookware over the

glass because it could scratch the surface.

Also, do not let hard or sharp objects fall onto
the glass or hit the edge of the hob.

Cleaning of the spark plug

This feature is obtained through a ceramic igni-
tion candle with a metal electrode. Keep these
components well clean to prevent difficult light-
ing and check that the burner crown holes are
not obstructed.

Periodic maintenance

Periodically speak your local Service Force
Centre to check the conditions of the gas sup-
ply pipe and the pressure adjuster, if fitted.

Troubleshooting

Problem

Possible cause

Remedy

There is no spark when lighting
the gas

• There is no electrical supply

• Make sure that the unit is con-

nected and the electrical supply
is switched on.

• Control the fuse. If the fuse is

released more than one time,
refer to a qualified electrician.

• Burner cap and crown are

placed uneven

• Make sure that the burner cap

and crown are in correct posi-
tions.

The flame is blow out immediately
after ignition

• Thermocouple is not heated

sufficient

• After lightning the flame, keep

the knob pushed for approxi-
mately 5 seconds.

The gas ring burns unevenly

• Burner crown is blocked with

food residues

• Make sure that the injector is

not blocked and the burner
crown is clear of food particles.

8

www.zanussi.com