background image

9

PEACE OF MIND FOR TWENTY FOUR MONTHS

STANDARD GUARANTEE CONDITIONS

We,  Zanussi  Ltd.,  undertake  that  if  within  twenty  four  months  of  the  date  of  the  purchase  this  Zanussi  built-in
appliance  or  any  part  there  of  is  proved  to  be  defective  by  reason  only  of  faulty  workmanship  or  materials,  the
company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on
condition that:

The appliance has been correctly installed and used only on the electrical supply stated on the rating plate.

The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
operating and maintenance instructions.

The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not
authorised by us.

All service work under this guarantee must be undertaken by Zanussi Service Force Centre.

Any appliance or defective part replaced shall become the property of this company.

Home visits are made between 

8.30am and 5.30pm Monday to Friday

. Visits may be available outside these hours

in which case a premium will be charged.

EXCLUSIONS

This Guarantee does not cover:

Damage or calls resulting from transportation, improper use or neglect, the replacement of any lilght bulbs or removable
parts of glass or plastic.

Costs  incurred  for  calls  to  put  right  appliances  improperly  installed  or  calls  to  appliances  outside  the  United
Kingdom.

Appliances  found  to  be  in  use  within  a  commercial  environment,  plus  those  which  are  the  subject  of  rental
agreements.

Products of Zanussi manufacture which are not marked by Zanussi Ltd.

This guarantee is in addition to your statutory and legal rights.

ZANUSSI EUROPEAN GUARANTEE

If you should move to another country within Europe then your guarantee moves with you to your new home subject
to the following qualifications:

The guarantee starts from the date you first purchased your product.

The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of
use for this brand or range of products.

This guarantee relates to you and cannot be transferred to another user.

Your new home is within the European Community (EC) or European Free Trade Area.

The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal
household.

Before you move please contact your nearest Customer Care Centre, listed below, to give them details of
your new home. They will then ensure that the local Service Organisation is aware of your move and able to
look after you and your appliances.

France

Senlis

+33 (0)3 44 62 29 99

Germany

Nurnberg

+49 (0)911 323 2600

Italy

Pordenone

+39 (0)1678 47053

Sweden

Stockholm

+46 (0)8 738 79 50

UK

Slough

+44 (0)1753 219 897

Summary of Contents for ZH 280





















Reviews: