Zanussi ZHC 60 136 X, User Manual

11

Warning

• Failure to observe the instructions on cleaning

the unit and changing the filters will cause a
fire hazard. You are therefore strongly
recommended to follow these instructions.

• The manufacturer declines all responsibility

for any damage to the motor or any fire
damage linked to inappropriate maintenance
or failure to observe the above safety
recommendations.

Changing the light bulb(s)

•

Disconnect the cooker hood from the
mains supply.

• Prior to touching the light bulbs ensure

they are cooled down.

• Remove the grease filters to access light

bulbs area.

• Replace the old bulb with a new one of the

same type.

• Refit the grease filters.
• If the light does not come on, make sure the

bulb has been inserted in correctly before
contacting your local Service Force Centre.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a solution of water and mild washing up

liquid.

• Never use corrosive, abrasive or flammable cleaning products or products containing bleach.
• Never insert pointed objects in the motor’s protective grid.
• Only ever clean the switch panel and filter grill using a damp cloth and mild washing up liquid.

• Clean all the plastic parts with a soft cloth soaked in warm water and neutral soap.

• It is extremely important to clean the unit and change the filters at the recommended intervals.

Failure to do so will cause grease deposits to build up that could constitute a fire hazard.