37
Charcoal filter
•
The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
•
To do this you will need an original
ELECTROLUX charcoal filter (available from
your local Service Force Centre).
•
This filter cannot be cleaned or reused.
•
As a general rule, the activated charcoal
filter should be changed once every four
months.
•
Fitting — Fig. 4
Fit one charcoal filter on the left and one on the
right so to cover the plastic grids that protect the
fan wheel, check that the pins
R
on the
conveyor match with housing
S
on the charcoal
filter, then turn clockwise to fix it.
•
To remove
proceed in the reverse order.
•
Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
•
The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.
Changing the light bulb
•
Disconnect the unit from the mains power
supply.
•
Remove the grease filters.
•
Replace the old bulb with a new one of the
same type.
•
Refit the grease filter.
•
If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting the technical assistance service.
Fig. 4
S
S
R
R
