41
•
Mount the chimney holder close to the ceilingwith the rawl plugs and the screws.
Warning! Be careful that it is centered over the hood and horizontally aligned.
•
Hang the hood on the wall again.
•
Secure it with the 2 lower screws.
Fitting for ducting
•
Connect a tube between the hood air
outlet and the wall or roof exhaust
channel.
Fitting for recirculation
•
Mount the recirculation spigot with the
4 screws supplied.
Mounting the chimney
•
Connect the supply cord to the mains.
•
Place the chimney and fix it to the top
chimney holder with the two screws
supplied.
•
Lower the bottom part of the chimney
to the top of the hood.
Hooks
Additional
hanging points
Centre line
Chimney
holder
Lower
screws
Recirculation
spigot
Supply cord
Tube
Chimney
Air outlet
Chimney holder
Chimney
fixing
points
Fig. 9
Fig. 10
Fig. 11
