Zanussi ZHC945, Instruction Booklet

14

A: Built-in Electric Hob:       650mm clearance
B: Built-in Gas hob:             700mm clearance
C: Slot-in Electric Cooker:  685mm clearance
D: Slot-in Gas Cooker:        787mm clearance

Hob

Clearance Height

The cooker hood is designed to be 

fi

 tted over a cooking 

appliance at the clearance heights stated, providing the 
maximum output of the appliance beneath does not 
exceed the maximums quoted in the Technical Speci-

fi

 cations.

If the output of the appliance below the cooker hood 
exceeds the maximum outputs quoted, please refer to 
the cooker manufacturer’s installation instructions.

A clearance height of 650mm (25 1/2 ”) is required when 
installed above a built-in electric hob, or 700mm (27 1/2 
”) when installed above a built-in gas hob.

A clearance height of 685mm (27”) is required when 
installed above a slot-in electric cooker, or 787mm
(30 1/2 ”) when installed above a slot-in gas cooker.

When installed between adjoining wall cabinets, the wall 
cabinets must not overhang the hob and the distance 
between the underside of the cabinet and the worktop 
must be 450mm. If the height of the wall cabinet is less 
than 450mm, a gap of 50mm must be maintained either 
side of the hob.

This cooker hood must not be installed above a 
cooking appliance with a high level grill.

The hood can be installed above these heights but 
for optimum performance it should be installed at the 
distances quoted for the appropriate heat source.
This appliance can be used in either extraction mode 
(ducting) or recycling mode (

fi

 ltering).

The hood is supplied suitable for recirculation with the 
charcoal 

fi

 lters 

fi

 tted. 

When used in the extraction mode (ducting) the charcoal 
filters are not required and 

must

 be removed and 

destroyed.

INSTALLING THE COOKER HOOD