Zanussi ZHRN883K, User Manual

seconds (a pan, a cloth, etc.). An acoustic

signal sounds and the hob deactivates.

Remove the object or clean the control

panel.

• you do not deactivate a cooking zone or

change the heat setting. After some time

 comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting

The hob deactivates

after

, 1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hour

5.3 The heat setting

Touch   to increase the heat setting. Touch

 to decrease the heat setting. Touch 

and   at the same time to deactivate the

cooking zone.

5.4 Activating and deactivating the

outer rings

You can adjust the surface you cook to the

dimension of the cookware.

Use sensor field:   
To activate the outer ring: touch the sensor

field. The indicator comes on.
To deactivate the outer ring: touch the

sensor field until the indicator goes out.

5.5 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for

some time and then decreases to the correct

heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone: touch   until the correct heat setting
comes on. After 3 seconds   comes on.

To deactivate the function: touch  .

5.6 Timer

• Count Down Timer

You can use this function to set the length of

a single cooking session.
First set the heat setting for the cooking

zone, then set the function.

To set the cooking zone: touch 

repeatedly until the indicator of a cooking

zone appears.
To activate the function or change the
time: touch   or   of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash, the time

counts down.

To see the remaining time: touch   to set

the cooking zone. The indicator of the

cooking zone starts to flash. The display

shows the remaining time.

To deactivate the function: touch   to set
the cooking zone and then touch  . The

remaining time counts down to 00. The

indicator of the cooking zone disappears.

When the countdown ends, an

acoustic signal sounds and 00

flashes. The cooking zone

deactivates.

To stop the sound: touch  .
• Minute Minder

You can use this function when the hob is

activated and the cooking zones do not
operate. The heat setting display shows  .

To activate the function: touch   and then
touch   or   of the timer to set the time.

When the time finishes, an acoustic signal

sounds and 00 flashes.

To stop the sound: touch  .

10

ENGLISH