D475
Door reversibility
The appliance’s door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins at
the top (A) and at the bottom (B).
9
D480
B
A
Instructions for building into a tall
kitchen unit
Dimensions of the recess
Height of housing
mm 702
Depth of housing
mm 550
Width of housing
mm 560
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
Instructions for building in under a
worktop
Dimensions of the recess
Height of housing
mm 702
Depth of housing
mm 550
Width of housing
mm 560
1. For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
The top of the unit door must be 20 mm lower than
worktop.
50 mm
min.
cm
2
200
200 cm
2
min.
D526
min 200cm
2
560 min
600
20
702
20
50
550 min
560 min
D474
2. Push the appliance into the recess, making sure
that it is set back by 7 mm from the front edge of
the recess.
Summary of Contents for ZI 1450
Page 1: ...2222741 42 INSTRUCTION BOOKLET REFRIGERATOR ZI 1450 ...
Page 12: ......
