40
Door reversal
The applianceÕs door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins
at the top and at the bottom.
Warning!
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
D163
B
A
Building-in
Dimensions of the recess
Height of housing (1)
880 mm
Depth of housing (2)
550 mm
Width of housing (3)
560 mm
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth
50 mm
Width
540 mm
PR0
540
50
3
2
1
2. Apply joint the sealing strip as shown in figure.
D132
1.
Slide the appliance into the recess, pushing it
against the wall on the handle side.
A
D022
Summary of Contents for ZI 1612
Page 12: ......