14
For appropriate venting, follow indications in
Fig. 2.
Fig. 2
Push appliance into housing until stop strip (A)
touches the kitchen unit.
Fig. 3
If after having carried out the operation described
in the previous section there is still some space left
between the appliance and the kitchen unit, fit the
trimming provided together with the appliance on
the stop strip (A).
Fig. 4
D033
50-min. cm 200
2
min.
cm
200
2
A
D015
D265
A
Open the door and push the appliance against the
side of kitchen furniture opposite to that of
appliance hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grill (C)
and hinge cover (D) into position.
Fig. 5
Press in the joint covers between the appliance and
the kitchen furniture.
Fig. 6
Apply covers (B) on joint cover lugs and into hinge
holes.
Fig. 7
D502
D
C
D503
D353
B
