4
Limpieza de las partes internas
Antes del empleo limpiar todas las partes internas
con agua tibia y jabón neutro, a fin de eliminar el
característico olor de nuevo y secarlas luego
cuidadosamente.
USO
El tablero de control
No emplear detergentes o polvos
abrasivos que podrían dañar las
superficies.
A - Tecla de encendido / apagado del aparato
B - Display de visualización de las temperaturas y
funciones
C - Tecla de activación de las funciones
D - Mando de regulación de la temperatura
congelador
DISPLAY
1.Indicador de alarma puerta abierta
2.Indicador de temperatura positiva o negativa
3.Indicador de la temperatura
4.Si está encendido, indica que está activa la
función congelation rapida
A
B
C
D
2
3
4
1
21
Instructions for totally built-in
appliances
Dimensions of the recess
Height (1) 1780 mm
Depth (2) 550 mm
Width (3) 560 mm
The appliance’s door has been locked in position
for transport by means of pins on both sides. Ac-
cording to the door opening direction, remove
relevant pins at the top and at the bottom.
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of ob-
struction.
Furthermore, it is necessary that the niche is provid
with a conduct of ventilation having the following
dimensions:
depth
50 mm
width 540 mm
PR01
540
50
3
2 1
50 mm
min.
200 cm
2
200 cm
2
min.
D567
D023
1
2
Fit the appliance in the niche by making sure that it
stands against the interior surface of the unit on the
side where the door hinges of the appliances are
fitted.Insert the appliance until the upper strip butts
up against the unit (1) and make sure that the lower
hinge is in line with the surface of the unit (2).
13mm
D740
Ø 2,5
Drill the unit using a Ø 2.5 mm drill (10 mm max.
penetration);
Fix the square fitting to the appliance.
All manuals and user guides at all-guides.com
