24
I nstructions for totally built-
in appliances
Dimensions of the recess
Height 1780 mm
Depth 550 mm
Width 560 mm
The applianceÕs door has been locked in
position for transport by means of pins on both
sides. According to the door opening direction,
remove relevant pins at the top and at the
bottom.
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation
openings clear of obstruction.
Furthermore, it is necessary that the niche is provid
with a conduct of ventilation having the following
dimensions:
depth 50
mm
width 540 mm
PR01
540
50
B
T
H
50-min. cm 200
2
2
min.
cm
200
D033
D727
C
D
A
D022
Push appliance into the housing until stop strip (A)
touches the kitchen unit.
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grille (C)
and hinge cover (D) into position.
