AUTOMATIC HEAT UP
Activate this function to get a desired heat setting
in a shorter time. When it is on, the zone operates
on the highest setting in the beginning and then
continues to cook at the desired heating setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking zone:
touch ( comes on). Immediately touch a
desired heat setting. After 3 seconds comes on.
To deactivate the function: change the heat
setting.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking zone:
touch . comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the time:
touch or of the timer to set the time (00 - 99
minutes). When the indicator of the cooking zone
starts to flash slowly the time counts down.
To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone
with and touch . The remaining time counts
back to 00. The indicator of the cooking zone goes
out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch .
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows .
To activate the function: touch . Touch or
of the timer to set the time. When the time
comes to an end, the sound operates and 00
flashes.
To stop the sound: touch .
The function has no effect on the
operation of the cooking zones.
PAUSE
This function sets all cooking zones that operate to
the lowest heat setting.
When the function operates, all other symbols on
the control panels are locked.
When the function is active, and symbols
can be used. The function does not stop the timer
functions: and .
Touch to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch . The previous
heat setting comes on.
LOCK
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the
heat setting.
Set the heat setting first.
To activate the function: touch . comes on
for 4 seconds. The Timer stays on.
To deactivate the function: touch . The
previous heat setting comes on.
9
