16
Operating the hob
You operate the appliance with the combination
appliance’s ring switches. The operation and the
function of the ring switches is described in the
Operating Instructions for the combination appli-
ance.
Switching the outer rings on and off is also
described there.
3
When a cooking zone is switched on, it may
hum briefly. This is a characteristic of all ce-
ramic glass cooking zones and does not im-
pair either the function or the life of the
appliance.
Tips on Cooking and Frying
Cookware
•
You can recognise good cookware from the bot-
toms of the pans. The bottom should be as thick
and flat as possible.
•
Cookware made of enamelled steel or with alumin-
ium or copper bottoms can leave discolorations on
the glass ceramic surface which are difficult or im-
possible to remove.
Energy saving
2
Always place cookware on the cooking zone
before it is switched on.
2
If possible, always place lids on the pans.
2
Switch cooking zones off before the end of the
cooking time, to take advantage of residual
heat.
2
Bottom of pans and cooking zones should be
the same size.
