Zanussi ZKF 100, Instruction Booklet

24

If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.

Mod. ..........

Prod. No. ...........

Ser. No. .........

Mod. ..........
Prod. No. ...........

Ser. No. .........

P0042

P1035UK

Water is not

visible in the machine. The machine,

which is the result of modern technology, runs

in a very economical way with low water

consumption. Performance is

nevertheless excellent.

Problem

Possible cause

• Spinning starts late or the

laundry is not spun enough:

• The machine will not dry or the

laundry is not dry enough

• The electronic unbalance detection device has cut

in because the laundry is not  evenly distributed  in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 20 minutes, the
laundry is still not evenly distributed in the drum,
the machine will not spin. If at the end of the
programme the laundry is not spun enough,
redistribute the load manually and select the spin
programme.

• The water tap is closed.

• The drain filter is clogged.

• The drying time has not been selected.

• An appropriate drying time has not been chosen.

• There is too much laundry inside the appliance.

The machine makes an unusual

noise. The machine is fitted with a commutator

motor which improves machine

       performance.

P1034UK

132990630.qxd  20/02/2004  17:40  Pagina  24    (Nero/Process Black pellicola)