Please examine the appliance for any damage. If
the appliance is damaged contact your retailer
before the appliance is connected.
Please keep packaging away from children and
dispose of with due regard for the environment.
Important Safety Requirements
•
The hob must be installed by a qualified
electrician / competent person.
•
Damaged hobs with cracks or breakages in the
ceramic glass must not be connected to the
electrical supply.
•
This hob must be installed in accordance with
the IEE Wiring Regulations (Current Edition).
Detailed recommendations are contained in the
following British Standards Codes of Practice:
B.S.6172 / B.S.5440 Part 2 and B.S.6891 Current
Editions.
Disposal
All packaging parts are recyclable, wooden
strips are non-treated, foils and hard foam
are marked. Packaging materials and old
appliance should be disposed of at
authorised disposal sites.
Installation into the kitchen worktop
Protection against accidental contact according
to the regulations set by VDE or other local
authorities and EN60335 must be ensured by the
correct installation of the appliance. The same
refers to the back of the appliance which, even in
the case of built-in solutions away from the wall,
must not be freely accessible.
Built-in cupboards have to be located and
fastened so that they are stable.
Measurement of:
Worktop Opening
Width:
560mm
Depth:
490mm
Corner Radius:5mm
Appliance:
Width:
572mm
Depth:
502mm
Height:
49mm
Voltage:
AC 230 V 50 Hz/60Hz
Total Connection Load: 5.8 kW
12
